Product Information
The Hybrid Solar Street Light: within our LED solar lighting range, the Wind Turbine combined with our advanced Photovoltaic array gives the system a solution for high altitude regions as the solar configuration is combined within two engines harvesting energy via UV and wind technology.
Turbine power is consistent throughout night hours allowing continuous energy generation. It is an intelligent stand-alone LED street lighting system allowing electricity to be generated in the most challenging weather conditions.
The AST-1782P is our solar array LED solar lighting system which operates via UV & photovoltaic panel array this system being suitable for warmer climates – within this range it is a standalone solution that can be customised to meet continued lighting suitable for its geographical location.
Both systems have full MPPT remote manage operation and offers significant savings both on installation cost and no ongoing expense (with Australia now represented in the top 20 for the highest electricity costs in the world). It makes sense to look at the benefits of renewable energy and the immediate return on investment.
Both systems can be configured to meet site location requirements be it turbine combined with solar or solar array only for 11,200LM or 14,000LM.
Suitable Site Locations
- Cold climate (sub-zero temperatures)
- Roadways
- Roads
- Port terminals
- Intersections
- Parking bays
- Industrial sites
Specifications
100 Watts
Power Consumption (light) | 100 Watt |
Power Generation (Turbine) Photovoltaic Array (Solar) | 250 Watt, DC24V with lower speed wind start up, fen design. 90 Watt, DC12V x 2 operational +/- |
Lifetime | 74,000 hour LED rating Philips Cree |
Light Output (max) | 100W: 14,000 lumens |
Colour Temperature | Cool White 4000K – 5700K |
Light Control | Hybrid MPPT controller with Pre-programmed time control (24V) |
Lighting Modes | Smart drive motion sensor or pre-programmed time-based mode for constant output mode with lighting time function. |
Beam Pattern | IES Type III |
Battery Rating | 130Ah x 2 (all 12.8V+) |
Battery Chemistry | Lithium-ion Phosphate LiFePO4 (L10) (Gel) deep cycle |
Recharge Time | 5-6 hours in daytime (3 days secure back up power) |
Protection | IP66 rated |
Operating Temperatures | -20°C to +60°C |
Bird Spikes | Anti perching spikes are designed to protect against “fouling” spikes can be mounted at the highest point of panel array. This ensures that birds are unable to perch on the solar panels and allowing the optimum efficiency. |
Warranty | 5 year fitting warranty |
Product Identifiers | Commercial sensor drive, Philips CREE LED, CRI>75, Type III lens, L10 Lithium Phosphate, Sensor Drive or time control operation, Hybrid commercial Charge Controller. |
80 Watts
Power Consumption (light) | 80 Watt |
Power Generation (Turbine) Photovoltaic Array (Solar) | 200 Watt, DC24V with lower speed wind start up, fen design. 75 Watt, DC12V x 2 operational +/- |
Lifetime | 74,000 hour LED rating Philips Cree |
Light Output (max) | 80W: 11,200 lumens |
Colour Temperature | Cool White 4000K – 5700K |
Light Control | Hybrid MPPT controller with Pre-programmed time control (24V) |
Lighting Modes | Smart drive motion sensor or pre-programmed time-based mode for constant output mode with lighting time function. |
Beam Pattern | IES Type III |
Battery Rating | 120Ah x 2 (all 12.8V+) |
Battery Chemistry | Lithium-ion Phosphate LiFePO4 (L10) (Gel) deep cycle |
Recharge Time | 5-6 hours in daytime (3 days secure back up power) |
Protection | IP66 rated |
Operating Temperatures | -20°C to +60°C |
Bird Spikes | Anti perching spikes are designed to protect against “fouling” spikes can be mounted at the highest point of panel array. This ensures that birds are unable to perch on the solar panels and allowing the optimum efficiency. |
Warranty | 5 year fitting warranty |
Product Identifiers | Commercial sensor drive, Philips CREE LED, CRI>75, Type III lens, L10 Lithium Phosphate, Sensor Drive or time control operation, Hybrid commercial Charge Controller. |